In the manufacturing of plastic products through rotational moulding, small changes in the process can lead to big differences in output. One such factor is the use of the right roto release chemical. At Brilsol, we’ve spent years understanding the needs of moulders, and our solution is simple: a reliable, clean-releasing product that keeps your process running smoothly while protecting your moulds.
When moulds are not cleaned or maintained properly, they cause problems—rough finishes, product defects, and longer cycle times. That’s why Brilsol’s Roto Release Chemical is designed to deliver clean separation between the plastic and the mould, every time.
Let’s talk about how this small detail can bring better results to your production line.
Why Clean Moulds Matter
A clean mould isn’t just about looks—it affects performance and product consistency.
When plastic sticks to the mould:
- Products may have surface marks or uneven textures
- Demoulding takes longer and requires more force
- Mould damage becomes more likely
- More cleaning is needed, costing time and labour
- Final products may get rejected due to poor finish
Brilsol’s roto release chemical is made to avoid all this. It helps keep your moulds cleaner for longer, so you get better output with fewer issues.
What Makes Brilsol’s Roto Release Chemical Special?
We understand that not all release agents are equal. Some may leave residue, some stop working after a few cycles, and some may damage the mould surface. Brilsol’s formulation has been tested in different environments to strike the right balance of performance and safety.
Here’s how Brilsol stands out:
● Clean Separation
Our release chemical forms a thin, even layer on the mould surface. This prevents sticking without leaving build-up.
● Quick Application
Brilsol’s product is easy to apply using a spray or cloth. It spreads well, dries quickly, and stays in place for multiple cycles.
● Minimal Residue
It doesn’t create flaky or greasy layers that can ruin the next batch of moulds or require extra cleaning.
● Long-Lasting Protection
A single application can support several moulding cycles, depending on the material and mould design.
Compatible with Various Plastics
Whether you’re working with polyethylene, polypropylene, or specialty compounds, Brilsol’s roto release chemical performs across the board. It’s developed keeping in mind different temperature ranges and material behaviours that occur during rotational moulding.
Our product supports:
- Water tanks
- Industrial drums
- Furniture components
- Road barriers
- Playground items
- Storage bins and more
No matter the shape or thickness, it helps release your product without tugging or surface damage.
Protects Your Mould Investment
Moulds are expensive. Once damaged, repairs can be time-consuming and costly. Many release chemicals cause wear and tear over time. Brilsol’s formula is made to be gentle on mould surfaces. It doesn’t corrode or stain, which means your moulds stay in better shape for longer.
This means:
- Fewer mould repairs
- Consistent moulding quality
- Lower maintenance cost
- Longer mould life
Where Silicone Grease Comes In
While the roto release chemical takes care of the surface during demoulding, silicone grease works behind the scenes in the mould setup.
Brilsol’s silicone grease is perfect for:
- Lubricating movable parts in the mould
- Preventing metal-on-metal wear
- Sealing joints to avoid leakage during moulding
- Adding a layer of temperature-resistant protection
Together, the roto release chemical and silicone grease create a complete support system for your moulding process.
Safe to Use and Easy to Store
We’ve made sure that Brilsol’s release chemical is safe to use in most production environments. It does not contain harmful solvents or strong smells that can affect the workplace.
Key features:
- Non-flammable
- Low odour
- Low VOC
- Comes in easy-to-store containers
- Long shelf life
This makes it safe for workers and simple to handle during production shifts.
Simple Application Guide
To make the most out of Brilsol’s roto release chemical, follow this short process:
- Clean the Mould: Remove old residue and dust.
- Apply Evenly: Use a spray gun or lint-free cloth.
- Let It Set: Wait a few seconds to let it form a dry layer.
- Start the Cycle: Begin moulding as usual.
Repeat application every few cycles depending on material and part complexity. In most cases, a fresh coat every 3–5 cycles gives consistent results.
How Customers Use It
Here are some common use cases of our roto release chemical and silicone grease across industries:
Industrial Tank Makers
“Before Brilsol, demoulding took extra labour and often damaged tank necks. Now it’s quicker and cleaner.”
Furniture Moulders
“We deal with textured surfaces. The Brilsol release doesn’t dull the finish. It keeps it smooth.”
Container Manufacturers
“Surface gloss matters to our customers. This release agent gives the exact result we want without extra polishing.”
Why Brilsol?
Brilsol isn’t just another chemical supplier. We design our mould release solutions based on customer feedback, field testing, and deep understanding of moulding needs.
When you choose Brilsol, you get:
- A product that works consistently
- A team that understands your process
- Reliable supply and support
- Easy communication with product experts
Small details can make a big difference in the production process. Brilsol’s roto release chemical and silicone grease are designed to keep things running clean and smooth. From improving surface quality to protecting your mould investment, these products offer real value in every batch.
If you’re tired of dealing with sticking parts, rough finishes, and frequent mould cleaning, it might be time to make a switch.
Brilsol is here to help your team get better results—without slowing down your process.