1.Roto Release Agent

Roto release Agent is a “ready-to-use” release agent, forming a consistent release film on the mould.

  • Despite the film being  micro thin, it stays  impervious after cure, even to abrasive materials and temperature fluctuations as high as 450°C.
  • Roto release Agent forms a strong chemical bond to most mould materials  thus providing multiple releases per application.
  • Additionally, Release Agent does not transmit to the moulded parts, facilitating further processing like varnishing or gluing without the need for subsequent treatment.
  • There is substantial reduction in build-ups on the moulds caused by depositions of pigments, anti-aging agents, resin residues etc.
  • A build-up caused by Roto release Agent is unlikely, if it is used as directed.
  • Another feather in the cap is its compatibility for both, polyethylene and polypropylene types. As mentioned above, it provides multiple releases per application.
  • The appearance of pin holes is a common challenge faced during operation. This has also been tackled effectively as there is minimum residue on the mould surface thus reducing pin holes drastically.
  • Roto release will never be rough on the mould surface and so the lustre of the mould will be retained throughout.

For your reference, the technical data of Roto release Agent is as follows:

Composition Solution of synthetic resins
Appearance Colourless liquid
Density [g/cm³] Approx. 0.95
Flashpoint [°C] 75

2.Rotational Mould Cleaner

BRIL’s Rotational Mould Cleaners are meticulously crafted to eliminate build-up, colorants, and other substances adhering to moulds employed in the rotational moulding process. These cleaners play a vital role in upholding the quality and efficiency of the entire rotational moulding procedure.

Here are some key features of our Rotational Mould Cleaners:

  • Solvent-Based Options: Our cleaners are available in solvent-based formulations tailored to meet the specific requirements of the rotational moulding process.
  • Ready-to-Use Convenience: BRIL’s Rotational Mould Cleaners come in a ready-to-use form, ensuring users can easily apply them directly onto mould surfaces with utmost convenience.
  • High-Temperature Endurance: Crafted to endure high temperatures, these cleaners are versatile and can be effectively employed in various rotational moulding processes.
  • Compatibility with Plastic Types: BRIL’s mould cleaners exhibit compatibility with a broad spectrum of commonly used plastic types in rotational moulding, offering flexibility in application.
  • No Transfer to Moulded Parts: Our cleaners leave no residue on moulded parts, allowing for subsequent processing such as varnishing or gluing without the need for additional treatment.
  • Residue Minimization: Designed with precision, these cleaners minimize residues on mould surfaces, ensuring consistent and reliable outcomes throughout the rotational moulding process.

By incorporating regular cleaning of moulds with BRIL’s Rotational Mould Cleaners into your maintenance routine, you can enhance productivity, reduce waste, and achieve uniform results in all your rotational moulding projects. Trust BRIL for a cleaner, more efficient moulding experience.

For your reference, the technical data of Rotational Mould Cleaner is as follows:

Composition Solvent base
Appearance Colourless liquid
Specific Gravity 0.86g/mL
Flashpoint 26°C

3.BRiL’s Adhesive Remover

Introducing BRIL’s Adhesive Remover – the ultimate solution crafted for effortlessly eliminating stubborn sticky residue from rotational moulds. Formulated with a potent blend of solvents, this product is specifically designed to dissolve even the most resilient adhesives with remarkable ease.

Our adhesive remover serves as a powerful substance engineered to break down and eradicate glue, along with its remnants, from both mould surfaces and pre-mould labels. Its primary purpose is to streamline the removal of glue from surfaces, making the process significantly more manageable. Leveraging the effectiveness of organic solvents, this solution can dissolve or soften adhesive polymers that are resistant to water. Additionally, it may feature a gelling agent, enhancing viscosity to ensure the product adheres to the targeted area without running off.

Notably, our high-strength industrial formula ensures the swift dissolution of adhesives without compromising the mirror coating of rotational moulds. It’s the perfect remedy for eradicating sticky marks left behind by in mould graphics. This adhesive remover is user-friendly and guarantees the safety of pre-mould graphics.

While there are numerous commercial products available for removing adhesive residue, it’s essential to note that not every product is universally suitable for all materials. Therefore, we recommend carefully reading manufacturer instructions and conducting a preliminary test on an inconspicuous spot before full-scale use.

Choose BRIL’s Adhesive Remover for a reliable and efficient solution that meets the unique demands of adhesive removal, ensuring the longevity and pristine appearance of your rotational moulds.

For your reference, the technical data of BRIL’s Adhesive Remover is as follows:

Composition Mixture of Monocyclic Hydrocarbons
Appearance Colour hazen
Density @ 20°C (g/ml) 0.85
Flashpoint [°C] 46
X

Enter your details

Please enable JavaScript in your browser to complete this form.
×